HOW TO TROUBLESHOOT AND FIX MACARD N300 SETUP ISSUES

How to Troubleshoot and Fix Macard N300 Setup Issues

How to Troubleshoot and Fix Macard N300 Setup Issues

Blog Article

The Macard N300 Wi-Fi extender is designed to connect to your router both wirelessly and via a cable. However, if you're facing issues with setting up the Macard WiFi extender or other related problems, here are some solutions you can try to resolve the issue.

Troubleshooting Macard N300 Setup Issues

There are various technical problems that may arise during or after setting up the Macard N300 extender. If you encounter any issues, you can attempt the following tips to resolve them:

1. Correctly Use the WPS Button

If your router supports WPS, it’s recommended to connect the extender using the WPS method. Here’s how to do it:


  1. Plug the extender near your router.

  2. Press the WPS button on your router.

  3. Press the WPS button on the extender.

  4. The WPS LED on the extender will blink.

  5. Wait for the connection to establish.

  6. Once the connection is successful, the WPS LED will turn solid.

  7. After the connection, you can connect to the extended network using your router’s SSID and password.


2. Ensure Your PC is Connected to the Extender’s Network

You can access the Macard setup page (go.macard.online or 192.168.10.1) only if your PC is connected to the extender’s network. Connect your PC to the extender's Wi-Fi or use an Ethernet cable before attempting to log in.

3. Verify the Login URL or IP Address

To access the Macard setup page, the default URL is go.macard.online. If this doesn't work, try the default IP address 192.168.10.1. Double-check that you’re using the correct URL or IP to access the setup page.

4. Update Your Web Browser

If your browser is outdated, it might prevent the setup page from loading. To ensure your browser is up-to-date:

  • Open your browser.

  • Go to the settings menu.

  • Select "About" or "Help."

  • Click on "Update" or "Check for Updates."


5. Reboot the Extender

Rebooting the extender can help refresh its settings and clear any bugs. To reboot, simply unplug the extender, wait for a few seconds, and then plug it back in.

6. Reset the Macard N300 Extender

If none of the above solutions work, consider resetting your extender. To reset the Macard N300:

  • Locate the RESET button on the side panel of the extender.

  • Use a paperclip or pin to press and hold the button.

  • Wait for the extender to restart, then reconfigure it.


How to Reconfigure Your Macard Extender After a Reset

To set up your Macard Wi-Fi extender again after a reset, follow these steps:

  • Connect your computer to the extender’s Wi-Fi network.

  • Open your browser and go to the setup URL: go.macard.online or enter the IP address 192.168.10.1.

  • The Macard setup page will appear.

  • Enter the admin password located on the back of the extender.

  • Click Login to access the interface and begin setting up your extender.

  • Select your local router’s network to extend.

  • Enter a new Wi-Fi name (SSID) and password, then click Save.

  • The device will reboot to apply the settings, and once it restarts, you can connect to the extended network using the new SSID.


Conclusion

We hope these troubleshooting steps help you resolve the issues with your Macard N300 setup. By following these tips, you should be able to get your extender up and running smoothly again.

Report this page